Is possible install NomadBSD on HP Proliant DL360 G5 server?

Dear friends,

Is possible install NomadBSD on HP Proliant DL360 G5 server?

Thanks in advanced!
Marcelo

Hi

NomadBSD is not a server distribution.

Try to install FreeBSD.

Just wondering…
Didn’t it take you longer to write your post, than to put a NomadBSD-USB-stick into the server and try to boot it…? :thinking:

HP Proliant DL360 G5 16GB RAM
Sucess in RAID 0

root@NomadBSD:~ # dmesg
—<>—
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-RELEASE #0: Tue May 4 21:43:29 UTC 2021
root@NomadBSD:/usr/obj/usr/src/amd64.amd64/sys/NOMADBSD amd64
FreeBSD clang version 11.0.1 (git@github.com:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe)
VT(vga): text 80x25
CPU: Intel(R) Xeon(R) CPU E5345 @ 2.33GHz (2333.47-MHz K8-class CPU)
Origin=“GenuineIntel” Id=0x6fb Family=0x6 Model=0xf Stepping=11
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA>
AMD Features=0x20000800<SYSCALL,LM>
AMD Features2=0x1
VT-x: (disabled in BIOS) HLT,PAUSE
TSC: P-state invariant, performance statistics
real memory = 17179869184 (16384 MB)
avail memory = 16628715520 (15858 MB)
Event timer “LAPIC” quality 100
ACPI APIC Table:
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s)
random: unblocking device.
Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20201113/tbfadt-850)
Firmware Warning (ACPI): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20201113/tbfadt-850)
ioapic0 <Version 2.0> irqs 0-23
ioapic1 <Version 2.0> irqs 24-47
Launching APs: 4 2 5 7 6 1 3
Timecounter “TSC-low” frequency 1166732791 Hz quality 1000
KTLS: Initialized 8 threads
random: entropy device external interface
[ath_hal] loaded
WARNING: Device “kbd” is Giant locked and may be deleted before FreeBSD 14.0.
kbd1 at kbdmux0
000.000062 [4354] netmap_init netmap: loaded module
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
nexus0
vtvga0:
cryptosoft0:
aesni0: No AES or SHA support.
acpi0:
acpi0: Power Button (fixed)
Firmware Error (ACPI): AE_AML_BUFFER_LIMIT, Field [CDW3] at bit offset/length 64/32 exceeds size of target Buffer (64 bits) (20201113/dsopcode-356)
ACPI Error: Aborting method \134_SB._OSC due to previous error (AE_AML_BUFFER_LIMIT) (20201113/psparse-689)
acpi0: _OSC failed: AE_AML_BUFFER_LIMIT
cpu0: on acpi0
attimer0: port 0x40-0x43 irq 0 on acpi0
Timecounter “i8254” frequency 1193182 Hz quality 0
Event timer “i8254” frequency 1193182 Hz quality 100
hpet0: iomem 0xfed00000-0xfed003ff on acpi0
Timecounter “HPET” frequency 14318180 Hz quality 950
Event timer “HPET” frequency 14318180 Hz quality 350
Event timer “HPET1” frequency 14318180 Hz quality 340
Event timer “HPET2” frequency 14318180 Hz quality 340
Timecounter “ACPI-safe” frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
apei0: on acpi0
pcib0: on acpi0
pci0: on pcib0
pcib1: at device 2.0 on pci0
ACPI Warning: \134_SB.PCI0.PT02._PRT: Return Package has no elements (empty) (20201113/nsprepkg-251)
pci1: on pcib1
pcib2: at device 0.0 on pci1
pci2: on pcib2
pcib3: at device 0.0 on pci2
pci3: on pcib3
pcib4: at device 1.0 on pci2
pci4: on pcib4
pcib5: at device 2.0 on pci2
pci5: on pcib5
pcib6: at device 0.3 on pci1
pci6: on pcib6
pcib7: at device 3.0 on pci0
pci7: on pcib7
ciss0: port 0x4000-0x40ff mem 0xfde00000-0xfdefffff,0xfddf0000-0xfddf0fff irq 16 at device 0.0 on pci7
ciss0: PERFORMANT Transport
pcib8: at device 4.0 on pci0
pci8: on pcib8
pcib9: at device 5.0 on pci0
pci9: on pcib9
pcib10: at device 6.0 on pci0
pci10: on pcib10
pcib11: at device 0.0 on pci10
pci11: on pcib11
bce0: <HP NC373i Multifunction Gigabit Server Adapter (B2)> mem 0xfa000000-0xfbffffff irq 18 at device 0.0 on pci11
bce0: /usr/src/sys/dev/bce/if_bce.c(1269): Management firmware enabled but not running!
miibus0: on bce0
brgphy0: <BCM5708C 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce0: Using defaults for TSO: 65518/35/2048
bce0: Ethernet address: 00:1c:c4:7c:8b:ce
bce0: ASIC (0x57081020);
bce0: link state changed to DOWN
Rev (B2); Bus (PCI-X, 64-bit, 133MHz); B/C (1.9.6); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NOT RUNNING!)
Coal (RX:6,6,18,18; TX:20,20,80,80)
pcib12: at device 7.0 on pci0
pci12: on pcib12
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0x1000-0x101f irq 16 at device 29.0 on pci0
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0x1020-0x103f irq 17 at device 29.1 on pci0
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0x1040-0x105f irq 18 at device 29.2 on pci0
usbus2 on uhci2
usbus2: 12Mbps Full Speed USB v1.0
uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4> port 0x1060-0x107f irq 19 at device 29.3 on pci0
usbus3 on uhci3
usbus3: 12Mbps Full Speed USB v1.0
ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xf9df0000-0xf9df03ff irq 16 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
usbus4: 480Mbps High Speed USB v2.0
pcib13: at device 30.0 on pci0
pci13: on pcib13
vgapci0: port 0x3000-0x30ff mem 0xf0000000-0xf7ffffff,0xf9ff0000-0xf9ffffff irq 23 at device 3.0 on pci13
vgapci0: Boot video device
uhci4: port 0x3800-0x381f irq 22 at device 4.4 on pci13
usbus5 on uhci4
usbus5: 12Mbps Full Speed USB v1.0
pci13: at device 4.6 (no driver attached)
isab0: at device 31.0 on pci0
isa0: on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x500-0x50f irq 17 at device 31.1 on pci0
ata0: at channel 0 on atapci0
acpi_tz0: on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
WARNING: Device “psm” is Giant locked and may be deleted before FreeBSD 14.0.
psm0: model IntelliMouse, device ID 3
acpi_syscontainer0: port 0x2e-0x2f,0x4e-0x4f,0x620-0x65f,0x680-0x69f,0x600-0x61f,0x660-0x67f,0x300-0x30f on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: at iomem 0xc0000-0xcafff,0xe6000-0xe7fff pnpid ORM0000 on isa0
vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0
atrtc0: at port 0x70 irq 8 on isa0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer “RTC” frequency 32768 Hz quality 0
est0: on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 71d071d0600061b
device_attach: est0 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 71d071d0600061b
device_attach: est1 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 71d071d0600061b
device_attach: est2 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 71d071d0600061b
device_attach: est3 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 71d071d0600061b
device_attach: est4 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 71d071d0600061b
device_attach: est5 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 71d071d0600061b
device_attach: est6 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 71d071d0600061b
device_attach: est7 attach returned 6
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ugen0.1: at usbus0
ugen5.1: at usbus5
uhub0 on usbus0
uhub1 on usbus5
uhub1: <HP UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen4.1: at usbus4
ugen3.1: at usbus3
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
Trying to mount root from zfs:zroot/ROOT/nomadbsd-5806f915 []…
Root mount waiting for: CAM usbus0 usbus1 usbus2 usbus3 usbus4 usbus5
uhub2 on usbus4
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ugen1.1: at usbus1
ugen2.1: at usbus2
uhub3 on usbus3
uhub4 on usbus1
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub5 on usbus2
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
da0 at ciss0 bus 0 scbus0 target 0 lun 0
da0: <HP RAID 0 OK> Fixed Direct Access SPC-3 SCSI device
da0: Serial Number PH79MV0094
da0: 135.168MB/s transfers
da0: Command Queueing enabled
da0: 139979MB (286677120 512 byte sectors)
cd0 at ata0 bus 0 scbus2 target 0 lun 0
cd0: <HL-DT-ST CD-ROM GCR-8240N 2.03> Removable CD-ROM SCSI device
cd0: 16.700MB/s transfers (WDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
uhub1: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
bce0: bce_pulse(): Warning: bootcode thinks driver is absent! (bc_state = 0x00000006)
ugen5.2: at usbus5
ukbd0 on uhub1
ukbd0: on usbus5
kbd2 at ukbd0
ums0 on uhub1
ums0: on usbus5
ums0: 3 buttons and [XY] coordinates ID=0
Root mount waiting for: usbus4
Root mount waiting for: usbus4
Root mount waiting for: usbus4
uhub2: 8 ports with 8 removable, self powered
Cuse v0.1.36 @ /dev/cuse
lo0: link state changed to UP
bce0: link state changed to UP
ichwd0: <Intel 63XXESB watchdog timer> on isa0
ichwd0: ICH WDT present but disabled in BIOS or hardware
device_attach: ichwd0 attach returned 6
Security policy loaded: MAC/ntpd (mac_ntpd)
[drm] amdgpu kernel modesetting enabled.
root@NomadBSD:~ # dmesg | grep memory
real memory = 17179869184 (16384 MB)
avail memory = 16628715520 (15858 MB)
root@NomadBSD:~ # uptime
19:07 up 17 mins, 0 users, load averages: 0,33 0,59 0,50
root@NomadBSD:~ # clear

root@NomadBSD:~ # dmesg
—<>—
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-RELEASE #0: Tue May 4 21:43:29 UTC 2021
root@NomadBSD:/usr/obj/usr/src/amd64.amd64/sys/NOMADBSD amd64
FreeBSD clang version 11.0.1 (git@github.com:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe)
VT(vga): text 80x25
CPU: Intel(R) Xeon(R) CPU E5345 @ 2.33GHz (2333.47-MHz K8-class CPU)
Origin=“GenuineIntel” Id=0x6fb Family=0x6 Model=0xf Stepping=11
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA>
AMD Features=0x20000800<SYSCALL,LM>
AMD Features2=0x1
VT-x: (disabled in BIOS) HLT,PAUSE
TSC: P-state invariant, performance statistics
real memory = 17179869184 (16384 MB)
avail memory = 16628715520 (15858 MB)
Event timer “LAPIC” quality 100
ACPI APIC Table:
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s)
random: unblocking device.
Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20201113/tbfadt-850)
Firmware Warning (ACPI): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20201113/tbfadt-850)
ioapic0 <Version 2.0> irqs 0-23
ioapic1 <Version 2.0> irqs 24-47
Launching APs: 4 2 5 7 6 1 3
Timecounter “TSC-low” frequency 1166732791 Hz quality 1000
KTLS: Initialized 8 threads
random: entropy device external interface
[ath_hal] loaded
WARNING: Device “kbd” is Giant locked and may be deleted before FreeBSD 14.0.
kbd1 at kbdmux0
000.000062 [4354] netmap_init netmap: loaded module
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
nexus0
vtvga0:
cryptosoft0:
aesni0: No AES or SHA support.
acpi0:
acpi0: Power Button (fixed)
Firmware Error (ACPI): AE_AML_BUFFER_LIMIT, Field [CDW3] at bit offset/length 64/32 exceeds size of target Buffer (64 bits) (20201113/dsopcode-356)
ACPI Error: Aborting method \134_SB._OSC due to previous error (AE_AML_BUFFER_LIMIT) (20201113/psparse-689)
acpi0: _OSC failed: AE_AML_BUFFER_LIMIT
cpu0: on acpi0
attimer0: port 0x40-0x43 irq 0 on acpi0
Timecounter “i8254” frequency 1193182 Hz quality 0
Event timer “i8254” frequency 1193182 Hz quality 100
hpet0: iomem 0xfed00000-0xfed003ff on acpi0
Timecounter “HPET” frequency 14318180 Hz quality 950
Event timer “HPET” frequency 14318180 Hz quality 350
Event timer “HPET1” frequency 14318180 Hz quality 340
Event timer “HPET2” frequency 14318180 Hz quality 340
Timecounter “ACPI-safe” frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
apei0: on acpi0
pcib0: on acpi0
pci0: on pcib0
pcib1: at device 2.0 on pci0
ACPI Warning: \134_SB.PCI0.PT02._PRT: Return Package has no elements (empty) (20201113/nsprepkg-251)
pci1: on pcib1
pcib2: at device 0.0 on pci1
pci2: on pcib2
pcib3: at device 0.0 on pci2
pci3: on pcib3
pcib4: at device 1.0 on pci2
pci4: on pcib4
pcib5: at device 2.0 on pci2
pci5: on pcib5
pcib6: at device 0.3 on pci1
pci6: on pcib6
pcib7: at device 3.0 on pci0
pci7: on pcib7
ciss0: port 0x4000-0x40ff mem 0xfde00000-0xfdefffff,0xfddf0000-0xfddf0fff irq 16 at device 0.0 on pci7
ciss0: PERFORMANT Transport
pcib8: at device 4.0 on pci0
pci8: on pcib8
pcib9: at device 5.0 on pci0
pci9: on pcib9
pcib10: at device 6.0 on pci0
pci10: on pcib10
pcib11: at device 0.0 on pci10
pci11: on pcib11
bce0: <HP NC373i Multifunction Gigabit Server Adapter (B2)> mem 0xfa000000-0xfbffffff irq 18 at device 0.0 on pci11
bce0: /usr/src/sys/dev/bce/if_bce.c(1269): Management firmware enabled but not running!
miibus0: on bce0
brgphy0: <BCM5708C 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce0: Using defaults for TSO: 65518/35/2048
bce0: Ethernet address: 00:1c:c4:7c:8b:ce
bce0: ASIC (0x57081020);
bce0: link state changed to DOWN
Rev (B2); Bus (PCI-X, 64-bit, 133MHz); B/C (1.9.6); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NOT RUNNING!)
Coal (RX:6,6,18,18; TX:20,20,80,80)
pcib12: at device 7.0 on pci0
pci12: on pcib12
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0x1000-0x101f irq 16 at device 29.0 on pci0
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0x1020-0x103f irq 17 at device 29.1 on pci0
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0x1040-0x105f irq 18 at device 29.2 on pci0
usbus2 on uhci2
usbus2: 12Mbps Full Speed USB v1.0
uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4> port 0x1060-0x107f irq 19 at device 29.3 on pci0
usbus3 on uhci3
usbus3: 12Mbps Full Speed USB v1.0
ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xf9df0000-0xf9df03ff irq 16 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
usbus4: 480Mbps High Speed USB v2.0
pcib13: at device 30.0 on pci0
pci13: on pcib13
vgapci0: port 0x3000-0x30ff mem 0xf0000000-0xf7ffffff,0xf9ff0000-0xf9ffffff irq 23 at device 3.0 on pci13
vgapci0: Boot video device
uhci4: port 0x3800-0x381f irq 22 at device 4.4 on pci13
usbus5 on uhci4
usbus5: 12Mbps Full Speed USB v1.0
pci13: at device 4.6 (no driver attached)
isab0: at device 31.0 on pci0
isa0: on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x500-0x50f irq 17 at device 31.1 on pci0
ata0: at channel 0 on atapci0
acpi_tz0: on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
WARNING: Device “psm” is Giant locked and may be deleted before FreeBSD 14.0.
psm0: model IntelliMouse, device ID 3
acpi_syscontainer0: port 0x2e-0x2f,0x4e-0x4f,0x620-0x65f,0x680-0x69f,0x600-0x61f,0x660-0x67f,0x300-0x30f on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: at iomem 0xc0000-0xcafff,0xe6000-0xe7fff pnpid ORM0000 on isa0
vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0
atrtc0: at port 0x70 irq 8 on isa0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer “RTC” frequency 32768 Hz quality 0
est0: on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 71d071d0600061b
device_attach: est0 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 71d071d0600061b
device_attach: est1 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 71d071d0600061b
device_attach: est2 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 71d071d0600061b
device_attach: est3 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 71d071d0600061b
device_attach: est4 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 71d071d0600061b
device_attach: est5 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 71d071d0600061b
device_attach: est6 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 71d071d0600061b
device_attach: est7 attach returned 6
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ugen0.1: at usbus0
ugen5.1: at usbus5
uhub0 on usbus0
uhub1 on usbus5
uhub1: <HP UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen4.1: at usbus4
ugen3.1: at usbus3
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
Trying to mount root from zfs:zroot/ROOT/nomadbsd-5806f915 []…
Root mount waiting for: CAM usbus0 usbus1 usbus2 usbus3 usbus4 usbus5
uhub2 on usbus4
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ugen1.1: at usbus1
ugen2.1: at usbus2
uhub3 on usbus3
uhub4 on usbus1
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub5 on usbus2
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
da0 at ciss0 bus 0 scbus0 target 0 lun 0
da0: <HP RAID 0 OK> Fixed Direct Access SPC-3 SCSI device
da0: Serial Number PH79MV0094
da0: 135.168MB/s transfers
da0: Command Queueing enabled
da0: 139979MB (286677120 512 byte sectors)
cd0 at ata0 bus 0 scbus2 target 0 lun 0
cd0: <HL-DT-ST CD-ROM GCR-8240N 2.03> Removable CD-ROM SCSI device
cd0: 16.700MB/s transfers (WDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
uhub1: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
bce0: bce_pulse(): Warning: bootcode thinks driver is absent! (bc_state = 0x00000006)
ugen5.2: at usbus5
ukbd0 on uhub1
ukbd0: on usbus5
kbd2 at ukbd0
ums0 on uhub1
ums0: on usbus5
ums0: 3 buttons and [XY] coordinates ID=0
Root mount waiting for: usbus4
Root mount waiting for: usbus4
Root mount waiting for: usbus4
uhub2: 8 ports with 8 removable, self powered
Cuse v0.1.36 @ /dev/cuse
lo0: link state changed to UP
bce0: link state changed to UP
ichwd0: <Intel 63XXESB watchdog timer> on isa0
ichwd0: ICH WDT present but disabled in BIOS or hardware
device_attach: ichwd0 attach returned 6
Security policy loaded: MAC/ntpd (mac_ntpd)
[drm] amdgpu kernel modesetting enabled.
root@NomadBSD:~ #

Sucess install in RAID 0.

Working like a refrigerator.

Captura de tela_2021-11-11_20-10-39

:sunglasses: